Intake

	In the spirit of racing, ESP Products has designed and produced an aluminum Mass Air Flow pipe and Inlet pipe. These pipes are a brushed aluminum, are less than half the weight of the steel pipes and also have a heat dissipating function. First used with our Front Mount Intercooler, the aluminum pipes created a nice finished look in the engine compartment and assisted with the dissipation of heat from the turbo's charged air. The inlet pipe is a 2-1/2" mandrel bent unit that is a direct replacement for stock, but without the "necked down" effect to restrict air flow. When matched with other ESP Products intake parts, you can have a 100% aluminum air intake system from the filter to the heads, unless you have our aluminum cylinder heads
	ESP 4" MAF Pipe Bare	INT087	$140.00
	ESP 4" MAF Pipe Black	INT086	$145.50
	The plenum spacer, manufactured exclusively for ESP Products, is made of a non heat conductive material and is 1/2" thick. This plenum spacer creates a shelf in your upper manifold to direct the air evenly to all cylinders. The increased volume given by the plenum spacer increases engine horsepower and torque. Gaines of 7-10 hp and 10-15 ft/lb. of torque are common. The spacer kit will include two plenum gaskets, longer hardware, and instructions
	ESP Plenum Spacer 1" (aluminum)	INT110	$94.00

 

P/N	Description		Retail	Member
INT001	STOCK AIR FILTER K&N		$32.90	$30.07
INT002	PERFORMANCE AIR FILTER K&N 9"		$51.70	$47.30
INT003	PERFOIRMANCE AIR FILTER 14"		$65.40	$59.81
INT004	4" PERFORMANCE AIR FILTER K&N 12"		$62.20	$57.00
INT010	PASS. SIDE BREATHER K&N		$17.00	$15.95
INT011	PASS. SIDE BREATHER – T/A K&N		$17.00	$15.95
INT012	DRIVER SIDE BREATHER K&N (NEW DESIGN)		$32.00	$30.00
INT013	CLEANER SOLUTION 12.0 OZ K&N		$6.50	$5.91
INT014	FILTER OIL 8.0 OZ K&N		$6.00	$5.73
INT020	STAGE 3 CAM-V6 (GOOD TORQUE + TOPEND)		$150.00	$139.54
INT021	STAGE 4 CAM-V6 (HIGH TORQUE + TOPEND)		$150.00	$139.54
INT030	ESP GRIND CAM-V6 (550-625HP)		$160.00	$149.80
INT031	ESP RACE CAM-V6 (600-700HP)		$160.00	$149.80
INT040	ESP 3.8 STRIP HEADS (EXCHANGE) CNC		$1,250.00	$1,194.40
INT041	ESP 3.8 RACE HEADS (EXCHANGE) CNC		$1,350.00	$1,287.00
INT042	3.8 STREET HEADS 1.70/1.50 (EXCHANGE)		$825.00	$788.00
INT050	3.0 STRIP HEADS (EXCHANGE)		$1,170.00	$1,115.40
INT051	3.0 STREET HEADS (EXCHANGE)		$825.00	$788.00
INT060	STOCK INTAKE MANIFOLD (FACTORY)		$309.00	$287.50
INT061	PORTED INTAKE MANIFOLD (EXCHANGE0		$200.00	$160.80
INT062	ESP BALANCED INTAKE MANIFOLD (EXCH)		$250.00	$237.50
INT070	ESP 62 mm T-BODY / MAN. KIT (EXCH)		$199.00	$189.50
INT071	62 mm T-BODY/MAN.KIT W/SENSORS (EXCH)		$260.00	$203.16
INT080	ESP 3" MAF PIPE BARE ALUM 86-7’		$63.00	$58.60
INT081	ESP 3" MAF PIPE BLACK ALUM ’86-7		$66.00	$61.30
INT083	MAF PIPE BARE BLACK ’84-5		$70.00	$60.30
INT086	ESP 4" MAF PIPE BLACK ALUMINUM		$145.40	$140.40
INT087	ESP 4" MAF PIPE BARE ALUMINUM		$140.00	$135.00
INT090	1.55 V6 ROLLER ROCKERS (BILLET ALUM.)		$422.00	$411.95
INT091	1.65 V6 ROLLER ROCKERS (BILLET ALUM.)		$434.00	$415.00
INT110	ESP PLENUM SPACER (1" ALUMINUM)		$94.38	$88.44
INT140	ESP ALUMINUM INLET PIPE		$65.12	$59.95
INT150	INTERCOOLER HOSE KIT (STOCK 3/6)		$26.00	$22.00
INT160	ROLLER CAM SHAFT CUSTOM		$305.00	$284.50
INT161	COMPLETE ROLLER CAM KIT		$845.00	$827.45
INT200	ALUMINUM "CHAMPION" CYLINDER HEADS		$1,495.00	$1,450.15

Turbo  Intercooler  Engine  Intake  Gauges  Tech  Fuel

Parts  Rear End  Exhaust  Ignition  Suspension  Gaskets

Transmission  Brakes  Miscellaneous  Cosmetics